Filter Cartridge

The comprehensive range of Spun Bonded Filter Cartridge offered by us is made of 100% polypropylene fibers. These fibers are tightly spun together with utmost care to form an incline density from outer to inner surface. Available with core & without core adaptation., the excellent structure remains essential even under harsh operating conditions without any media migration. Binders, resins or lubricants, polypropylene fibers are blown continuously on central molded core to attain optimum quality.

Features:

• Free of surfactants, Binders and Adhesives

• Excellent Flow with Low Pressure Drop

• High Dirt Holding Capacity

• High Strength & pressure resistance

• 100 % Polypropylene For wide chemical compatibility

• One piece construction up to 1016 mm

• Nominal & absolute Filtration rating

• Certificated By NSF42 And FDA CFR Title 21

Technical specification:

The configurations are as follows:

• Double Open Type (DOE Type)

• Code 7 (226 O Ring Design)

The application areas are as follows:

• Food & Beverages: bottled water, flavors, polishing lines

• Pharmaceuticals: base product clarifications, membrane pre-filter

• Fine Chemicals: solvents, process streams, water purification

• Magnetic coating: dispersions, coating lines, solvents

• Petrochemicals: water flood, comletion fluids, amines

• Cosmetics: alcohols, essential oils, water lines

• Water Treatment: membrane protection, resin trap

• Metal Finishing: plating solution, paint and resin products, Wash

• Electronics: electroplating, etching, image development

Our clients can avail from us an extensive range of Wound Filter Cartridge, which is manufactured to meet the most challenging application requirements of filtration. These cartridges are compact and can be easily installed and maintain filtration system that further removes particles from liquid. These wound filter cartridges are processed using latest technology based machines into specific fibers. After, which these are wound into cartridges with carefully controlled micron rating, after carding and spinning into roving. Our entire range is widely appreciated in the market due to its high dirt holding capacity and the rugged construction that allow excellent performance in different in liquid and gas filtration application.

Salient Features:

• Standard and customizes sizes fit most housings
• Filtration rating from 1 to 100 Micron
• High Strength & pressure resistance
• Manufactured in continuous length
• Full range of sizes from 10¿ to 60¿ Length
• Excellent Flow With Low Pressure Drop
• High Dirt Holding Capacity
• Compatible with a wide range of fluids
• NSF & FDA approved

The technical specifications of the wound filter cartridge are as follows:

Technical Specification:

• Sizes: 10”, 20”, 30”, 40”, 60” Long
• Micron Rating: 0.5, 1, 5, 10, 25, 50, 75, 100
• Outer Diameter: 58 mm (2.3”), 64 mm (2.5), 100 mm (4”), 110mm (4.5”), 6”, 8”
• Inner Diameter: 25mm

The configuration of the product is as follows:

• Double Open Type (DOE Type)
• Code 7 (226 O Ring Design)

Made of varied material such as:

• Polypropylene with Polypropylene Core
• Cotton with Stainless steel core
• Glass fiber with stainless steel core

The application area for the product is as follows:

With the assistance of our professionals, we are offering a wide range of Polypropylene Pleated Cartridge for critical filtration application. We make use of advanced gradient density micro fiber media technology to ensure excellent micro ratings, high flow rates and high contaminant holding capacities in the Cartridge. Known for extraordinary combination of polypropylene media along with a difference in the fiber diameter helps to form a gradient density matrix, that range from open on the outside to finer inside. Thus, by providing a filter within filter can significantly increase contagion holding capacity & throughputs. We also make sure that the components used in manufacturing process are also chemically inert, biologically safe and that conforms to FDA and other international standards.

Distinct Features:

• All Polypropylene Construction
• Absolute & Nominal Efficiency
• 0.1 to 40 Micron Ratings
• Gradient Density Micron Fiber Media
• High Surface Area more than 0.5 m2
• Robust Outer Cage
• Biologically Safe
• Wide Compatibility
• Non Fibber Migration
• Thermally Welded Construction
• FDA Approved Filters
• End connections to fit all standard housings

Technical specifications in terms of sizes, micron rating, inner diameter and others:

• Sizes: 10”, 20”, 30”, 40” Long
• Micron Rating: 0.1, 0.2, 0.45 , 1 , 5 , 10 , 20 Micron
• Outer Diameter:69 mm
• Inner Diameter: 28 mm

Configuration available for this range is:

• Double Open Type (DOE Type)
• Code 7 F (226 O Ring Design)
• Code 7 S (226 O Ring Design/flat)
• Code 3 F (222 O Ring Design)
• Code 3 S (222 O Ring Design/flat)

Available in the following constructions:

Filter Media 100 % Melt Blown Micro Denier Polypropylene Fiber

• Support Media Polypropylene Fiber
• Inner Core High Strength Polypropylene
• Outer Core High Strength polypropylene
• End Caps High Strength Polypropylene
• Ring / Gaskets EPDM / Buna N / Silicone / Viton / Cotton with Stainless steel core

The application areas are as follows:

We offer a quality range of Pleated Dust Collection Cartridges, which is manufactured using 100% pure graded polyester with different coating as per the application requirements of our clients. These are designed in a manner to build the dust collection cartridges in equipment; where as the pleated bags are used for existing dust collector in place of conventional dust collection bags, without any modifications. We make these cartridges using polyester media of high tenacity filament without using any binding agent. Manufactured using thermal tight bonded media these bags are washable and provides excellent pleats and known for their stable structure, fine dust release and good particle penetration resistance. Further, the filter media is pleated in diverse pleated depths and height to accommodated preferred filtration area.

Salient Features:

• High filtration area up to 20 m2
• Universal Fixing arrangements
• Open Pleat Spacing
• Low Consumption Of Compressed Air (For Cleaning)
• High Efficiency Due To Surface Filtration
• Very High Air To cloth Ratio
• Very high filtration efficiency
• Hard finish material gives better pleat ability.

Following are the technical specification in terms of filter media, coating, size and others:

The application areas:

• Pharmaceuticals
• Steel & Power
• Powder coating
• Shoot Blasting
• Cement
• Chemicals
• Metals & Minerals
• Paints & Pigment